High Intensity Heater

Please select from below KMI/M

Warmth creates cosiness

Gas-infrared high intensity heaters are decentralised heating systems – that is, heat is generated directly where it is needed.

Decentralised for maximum efficiency
Decentralised direct-fired systems have the advantage that the generation und release of the heat take place in one system. This prevents distribution losses - which is the basis of highest efficiency.

Gas-infrared-high intensity heaters generate a radiant heat similar to the sun’s rays. People, objects and surfaces are heated directly without heating up the ambient air. That is, despite low ambient temperature a pleasant warmth is felt. The heat is directly available, exactly where it is needed, without transmission losses.

In practice this means: the air temperature can be kept by 3 to 5 Kelvin below nominal temperature - with optimum, comfortable thermal sensation and simultaneous energy savings.

Proven technology with a modern look
Proven for more than 70 years: our atmospheric Premix-burner. In this injector burner, the gas is premixed with the necessary combustion air and distributed in the stainless steel-combustion chamber. The homogenised gas-air-mixture passes through a perforated, structured ceramic plate. The combustion process takes place on the surface and is of course environmentally friendly in the low-NOx-range.

The innovative high-grid radiation grid is installed in front of the ceramic plates. This constantly provides a stable flame and best radiation yield.

Fully insulated reflector
GoGaS- high intensity heaters of the KMI series have another big advantage: the reflector is lined with ceramic high temperature insulation. The full insulation ensures a maximum efficiency as unwanted heat losses are significantly reduced.

The reflector is equipped with individually adjustable secondary reflectors made of rolled stainless steel. Through these inserts, the installation can be carried out as a vertical or inclined radiator. The radiation can be directed wide, concentrated or asymmetrical into the room to be heated.

The centerpiece: The combustion chamber
High temperatures mean great thermal expansion. For this reason, our combustion chamber is suspended tension-free in the KMI housing. This unique GoGaS construction is perfect: The lifespan of the device is significantly extended, maintenance is made easier and, if necessary, the combustion chamber can be exchanged easily.

The combustion chamber of the heater is positioned inside of the reflector hood, achieving an optimal preheating of the gas-air-mixture. The result is a thermal efficiency of highly
efficient 95 %.

Catchword of the ErP-Directive
In the new ErP-Directive for heating devices, “Seasonal Efficiency” is an important catchword. According to this approach, heating systems are operated at part-load 85 % of the time. With our unique, patented double nozzle, the power in part-load operation can be reduced by 50 % - pressure independent. In this way, we achieve maximum values in the “Seasonal Efficiency”. The power control via the double nozzle is pulse width modulation capable (PWM) and thus adapts to all requirements.


  • immediately available heat
  • full- and part area heating possible
  • excellent thermal comfort
  • maximum efficiency
  • eco-friendly
  • no dust turbulence, no drafts
  • low noise
  • low NOx

Warmth creates cosiness

Gas-infrared-high intensity heaters are decentralized heating systems – that is, heat is generated directly where it is needed.

Decentralized for maximum efficiency
Decentralized direct fired systems have the advantage that the generation and release of the heat take place in one system. This prevents distribution losses - which is the basis of highest efficiency.

Gas-infrared-high intensity heaters create radiant heat similar to the sun’s rays. People, objects and areas are heated directly without heating up the ambient air. That means, despite low ambient temperatures a comfortable warmth is felt. The heat is directly available exactly where it is needed without transmission losses.

In practice that means: the air temperature can be kept by 3 to 5 Kelvin below nominal temperature - with optimum, comfortable thermal sensation and simultaneous energy savings.

Proven technology
Proven for more than 70 years: our atmospheric Premix-burner. In this injector burner, the gas is premixed with the necessary combustion air and distributed in the stainless steel-combustion chamber. The homogenised gas-air-mixture passes through a perforated, ceramic plate. The combustion process takes place on the surface and is of course environmentally friendly in the low-NOx-range.

The innovative high-grid radiation grid is installed in front of the ceramic plates. This constantly provides a stable flame and best radiation yield.


The centerpiece: the combustion chamber
High temperatures mean great thermal expansions. For this reason, our combustion chamber is suspended tension-free in the housing. This unique GoGaS construction is perfect: the lifespan of the device is significantly extended, maintenance is made easier and, if necessary, the combustion chamber can be exchanged easily.

Catchword of the ErP-Directive
In the new ErP-Directive for heating devices, “Seasonal Efficiency” is an important catchword. According to this approach, heating systems are operated at part-load 85 % of the time. With our unique, patented double nozzle, the power in part-load operation can be reduced by 50 % - pressure independent. In this way, we achieve maximum values in the “Seasonal Efficiency”. The power control via the double nozzle is pulse width modulation capable (PWM) and thus adapts to all requirements.

  • immediately available heat
  • full and part area heating possible
  • good thermal comfort
  • maximum efficiency
  • eco-friendly
  • no dust turbulence and drafts
  • low-noise
  • robust
  • low-NOx

Contact

Petra Görtz

T: +49 231 46505-81
petra.goertz@gogas.com

NEWS